310S Stainless Steel Strip

310S stainless steel is austenitic chromium-nickel stainless steel, with good oxidation resistance, corrosion resistance, because of a higher percentage of chromium and nickel, so that it has much better creep strength, with good high temperature resistance.
Wechat : +86 15165828999

Product Description

  • Commodity name: 310S Stainless Steel Strip

310S Stainless Steel Strip Description

310S stainless steel coil has good oxidation resistance, corrosion resistance, acid and alkali resistance due to the high content of nickel (Ni) and chromium (Cr). After increasing the content of carbon in austenitic stainless steel, the strength is improved because of its solid solution strengthening effect. The chemical composition characteristics of austenitic stainless steel are based on chromium and nickel to add molybdenum, tungsten, niobium and titanium, and because of its face-centered cubic structure, it has high strength and creep strength at high temperatures. 310S stainless steel is often used to manufacture boiler, steam turbine, industrial furnace and aviation, petrochemical and other parts of the industry.


Product Parameters

Product Name

310S Stainless Steel Strip

Type

Steel Coil

Thickness

2.5mm-10.0mm

Length

2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc.

Width

610mm-2000mm

Standard

ASTM, AISI, JIS, GB, DIN, EN, etc.

Surface

BA, 2B, NO.1, NO.4, 4K, HL, 8K, etc.

Scope of Application

Widely used in high temperature and electrical industry, medical equipment construction, chemical, food industry, agriculture and ship parts, food and beverage packaging,

Kitchen supplies, trains, airplanes, conveyor belts, vehicles, bolts, nuts, springs and screens, etc.

Certificate

ISO, SGS, BV, etc.

Production Technology

Hot Rolling, Cold Rolling

Edge Processing

Edging, Trimming

 

Chemical Composition

C

Si

Mn

Cr

Ni

S

P

≤ 0.08

≤1.0

≤ 2.0

24.0～26.0

19.0～22.0

≤ 0.03

≤ 0.045

 

Mechanical Properties

Tensile Strength Kb (MPa)

Yield Strength σ0.2 (MPa)

Elongation D5 (%)

Hardness

≥520

≥205

≥40

≤ 217HB;≤ 95HRB

 

Physical Performance

Density(g/cm³)

Modulus of Elasticity(Gpa)

Coefficient of Thermal Expansion(10-6/°C)

Coefficient of Thermal Conductivity(W/m*K)

Resistivity(ΜΩ. cm)

9.01

200

14.4

13.8

94

 

Surface Selection


Product Show

Factory Show

Customer Visit

Message

Requiredwrong format
Requiredwrong format
Requiredwrong format
Required

Products Recommended

©  Hongye Steel (Shandong) Co., Ltd. Rights Reserved